CNC MACHINING

• Hitachi Seiki CA23 HiCell
  • LnS Super Hydro Bar
  • 10 Station KV Quick Change Turret with Q-Setter
  • 12 Station ATC for a total of 22 Tool Capacity
  • 3600 rpm 10.0" Chuck with 2.5" Thru Spindle Capability
  • 3000 rpm 5 Hp X and Z Axis Live Tooling
  • Fully programmable X, Y, Z and C axis
  • 945 ipm Rapid Traverse
  • 15.75" Swing 19.7" Max Turning Length
• Hitachi Seiki HT20J
  • LnS Super Hydro Bar
  • 10 Station KV quick Change Tooling with Q-Setter
  • 1181 ipm Rapid Traverse
  • 5000 rpm 8.0" Chuck with 2.0" Thru Spindle Capability
  • 17.7" Swing, 15.4" Max Turning Length
• Hitachi Seiki HT20SH
  • LnS Super Hydro Bar
  • 0.1 See Turret Index with Q-Setter
  • X and Z Axis Live Tooling with C-Axis on Spindle
  • 945 ipm Rapid Traverse
  • 5000 rpm 8.0" Chuck with 2.0" Thru Spindle Capability
  • 15.0" Swing, 15.7" Max Turning Length

THREAD ROLLING

• 3 Reed B112, 2 Die Horizontal Thread Rolling Machines
  • 0 - 2.5" In Feed Capability
  • 0 - 2.0" Thru Feed Capability
  • Up to 4.125" In Feed Thread Length
  • Up to 20' Thru-Feed Length
  • 2.125" Spindle Diameter
  • 6" Die Diameter Max X 4.125" Max Die Length
  • Radial Die Load in Tons - 15
  • Over 190 Sets of Dies In House
• 1 Reed A22, 3 Die Vertical Thread Rolling Machine
  • 0.25 - 2.5" In Feed Capability
  • Up to 2.375" Thread Length
  • Up to 1.563 Spindle Diameter
  • 4" Die Diameter Max X 2.375" Max Die Length
  • Max Radial Die Load in Tons - 15
  • Cam Speeds (pieces/minute) - 6 to 26
  • Over 140 Sets of Dies In House
• 1 Pratt & Whitney, Size 0 Flat Die Thread Rolling Machine
  • 0 - 80 to 0.25 Thread Size Capability
  • 1.5" Max Thread Length
  • Over 40 Die Sets In House
• 1 B & G - SM4 Stud Master
  • 3/16" to 4" Diameter Chamfer
  • Spring Actuated Chamfer & Stamp Unit
  • Single One Step Chamfer and Stamping

AUTOMATICS & MANUALS

• Acme Gridley 1" RA-6
  • 1.0" Round, 78" Hex, 4564 Square Max Material Capacity
  • 239 - 2383 RPM Range
  • 3.375" Maximum Turning Length
  • Stock Reel and Stands, 5 Cross Slides, 5 Hinge Tool Slide Tool Holders
  • New 5th Position Pick-off and Back Finish Slide
  • Completely reconditioned and with new Splash guards in 2002
• Acer Mill E-Mill 3V's
  • 9" x 42" Table
  • 3 HP 60-4500 RPM Inverter controlled Variable Speed Motor
  • 28" x 12" x 12" with 5" Quill Travel
• Acer Lathe Dynamic 1340G
  • 13" x 40"
  • D1-4 Nose, 1.5 Max Bore, 80-2000 RPM, 3 HP
• Acer Surface Grinder Supra-618AHII
  • 6" x 18" Table
  • 20" x 7.5" Travel
  • 3450 RPM 8" x 0.5" x 1.25" Wheel
  • 2 Axis Hydraulic Table with Electronic Cross Feed
  • Coolant Tank
• Model UE-712 Vertical/Horizontal Band Saw
  • 7" Round, 7" x 12" Rectangle Max Capacity
  • 3/4" x 0.0392" x 93" Blade
  • Vertical and Horizontal Orientation
• (2) Brown & Sharp 00G Automatics
  • 0.5" Capacity

KITTING/PACKAGING

• One T-1000 Advance Poly Bagger with 8 Bowl Hopper Feed and Electronic Counting Eyes
• One T-1000 Advance Poly Bagger with 6 Bowl Hopper Feed with Electronic Counting Eyes
  • Bag Sizes from 2" x 3" to 13.5" x 24"
  • Mil Thickness - 1 Mil to 5 Mil
  • Weigh Counting Scale to Verify Kits
  • Ti-1000 In Line Thermal Transfer Printer
• Two T-1000 Advance Poly Bagger Hand Feed